Use Of Reflex Cameras - Optika Italy B-1000 Serie Manuel D'utilisation

13. Microphotography
13.1 Use of C-mount cameras
1. Loosen the clamping screw ① on the trinocular
port and remove the dust cap ②. (Fig. 56)
2. Screw the C-mount adapter ③ to the camera ④
and insert the round dovetail of the C-mount into
the empty hole of the trinocular port, then tighten
the clamping screw ①. (Fig. 57)
13.2 Use of Reflex cameras
1. Insert the Reflex adapter ① into the relay tube to
the microscope ②.
2. Screw the "T2" ring ③ (not provided) to the reflex
adapter.
3. Connect the Reflex camera ④ to the "T2" just
installed (Fig. 58).
4. Mount the other end of the relay tube ② into the
empty hole of the trinocular port, then tighten the
clamping screw. (Fig. 56)
• "T2" ring is not provided with the microscope, but
is commercially available.
• While shooting dark specimens, darken eyepieces
and viewfinder with a dark cloth to minimize the
diffused light.
• To calculate the magnification of the camera:
objective magnification * camera magnification *
lens magnification.
• If using an SLR camera, mirror movement may
cause the camera to vibrate.
• We suggest lifting the mirror, using long
exposure times and a remote cord.
Page 32
④
③
①
② ②
① ①
F ig. 56 F ig. 56
④
③
F ig. 57 F ig. 57
②
F ig. 58 F ig. 58