Optika Italy B-1000 Serie Manuel D'utilisation page 12

9. Insert the power supply jack in the connector
placed at the rear side of the microscope. (Fig. 9)
7.3.2 B-1000POL-I
1. Insert the reflected light illuminator ① on the
frame and lock the locking screw ② with the
provided Allen wrench. (Fig. 10)
2. Connect the illuminator cable jack to the socket
③ placed in the back side of the frame. (Fig. 11)
3. Insert the Bertrand lens ④ on the reflected light
illuminator and lock the locking screw ⑤ with the
provided Allen wrench. (Fig. 12)
①
③
④
⑤
Page 12
F F ig. 9 ig. 9
②
F ig. 10 F ig. 10
F ig. 11 F ig. 11
F ig. 12 F ig. 12