Use Of The Illuminator; Light Intensity Adjustment - Optika Italy CL Serie Manuel D'utilisation

8.

Use of the illuminator

8.1

Light intensity adjustment

1. Operate on the button ① to turn ON/OFF the LED and
to increase/decrease the illumination voltage. (Fig. 4)
2. The button will turn green.
• By pressing the button the light will cyclically
change: LOW INTENSITY --> HIGH INTENSITY -->
OFF.
8.2 Focusing the light beam
• The terminal part of the illuminator is equipped with a
beam focusing system.
• By moving up or down the terminal part ②, you can
concentrate or diffuse the beam of light.
1. Move the terminal part downwards to have a more
concentrated light beam. (Fig. 6)
2. Move the terminal part upwards to have a more diffuse
light beam. (Fig. 7)
All manuals and user guides at all-guides.com
Page 9
①
F ig. 4 F ig. 4
②
F ig. 5 F ig. 5
F F ig. 6 ig. 6
F ig. 7 F ig. 7