Optika Italy B-1000 Serie Manuel D'utilisation page 11

6. Mount the rotating stage: at the bottom of the
stage there is a spring, push this spring toward
the stage support ①, then push the stage down-
ward ②. (Fig. 5)
7. Screw each objective into the thread of
the nosepiece,
magnification. (Fig. 6)
8. Remove the dummy slider from Bertrand lens ③
and insert the analyser ④. (Fig. 7 - 8)
clockwise with increasing
①
③
Page 11
②
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
④
F ig. 8 F ig. 8