Microphotography; Use Of "C"Mount Camera; Use Of Reflex Camera - Optika Italy B-1000 Serie Manuel D'utilisation

16. Microphotography

16.1 Use of "C"mount camera

1. Loosen the clamping screw ① on the trinocular
port and remove the dust cap ②. (Fig. 88)
2. Screw the C-mount adapter ③ to the camera ④
and insert the round dovetail of the C-mount into
the empty hole of the trinocular port, then tighten
the clamping screw ①. (Fig. 89)
16.2 Use of Reflex camera
1. Insert the Reflex adapter ① into the relay tube to
the microscope ②.
2. Screw the "T2" ring ③ (not provided) to the reflex
adapter.
3. Connect the Reflex camera ④ to the "T2" ring
just installed (Fig. 90).
4. Mount the other end of the relay tube ② into the
empty hole of the trinocular port, then tighten the
clamping screw. (Fig. 88)
• "T2" ring is not provided along with the micro-
scope, but is commercialy available.
• While shooting dark specimens, darken eyepiec-
es and viewfinder with a dark cloth to miminize
the diffused light.
• To calculate the magnification of the camera: ob-
jective magnification * camera magnification *
lens magnification.
• If using an SLR camera, mirror movement
may cause the camera to vibrate.
• We suggest lifting the mirror, using long ex-
posure times and a remote cord.
Page 39
③
④
③
②
②
①
Fig. 88
④
Fig. 89
①
Fig. 90