Optika Italy B-1000 Serie Manuel D'utilisation page 8

6. Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7. Assembling
Once opened the microscope box, the microscope parts are the following:
7.1 B-1000POL
③
① Microscope frame
② Observation head
③ Condenser
④ Eyepieces
⑤ Objectives
⑥ Rotatable stage + mechanical stage
⑦ Bertrand lens
①
②
④
⑤
⑥
⑦
⑧ Analyzer
⑨ Tint plates
⑩ Dummy slider
⑪ Nosepiece centering screws
⑫ Allen wrench
⑬ Power supply
⑭ Dust cover
Page 8
⑭
⑫
⑪
⑧
⑬
⑩
⑨