Mission Hb Mode D'emploi page 83

Testing
Insert a test strip into the strip channel in the same direction as the arrows
indicated on the strip. Ensure that the test strip is inserted all the way to the
end of the strip channel, until the white edge of the test strip above the black
line is no longer visible.
The blood drop symbol will flash when the meter is ready for the specimen
to be applied. Apply approximately 10 µL of blood to the middle of the
Specimen Application Area of the test strip.
Note: For testing capillary blood, use the second drop of blood for
accurate results. Refer to Section 6 Fingertip Testing for
details.
28