Mission Hb Mode D'emploi page 77

For use with the Capillary Transfer Tube, hold the tube slightly downward
and touch the tip of the Capillary Transfer Tube to the blood drop. Capillary
action will automatically draw the sample to the fill line and stop.
Note： Make sure the blood covers the air vent of the tube or it will
Align the tip of the Capillary Transfer Tube with the Specimen Application
Area of the strip to apply the second drop of blood (approximately 10 μL).
Note： Do not touch the strip with the Capillary Transfer Tube or
be hard to squeeze blood out. Never squeeze the Capillary
Transfer Tube while sampling.
pipette. The capillary blood should be tested immediately
after collected. Use of a Capillary Transfer Tube or pipette
is recommended for accurate results.
22