Mission Hb Mode D'emploi page 82

Strip Processing and Testing
Ensure the meter is set up properly as described in previous sections. Turn
the meter on. The screen will briefly display all of the LCD symbols.
Observe the LCD at startup to ensure all segments and display elements are
turned on, and there are no missing icons or elements. The meter will
briefly show a blank display. Observe there are no segments or icons
permanently turned on.
After startup, the Initial Screen will be displayed. Ensure the code chip is
inserted, and compare the number showed in the display with the code
number printed on the test strip canister label. Refer to Section 4 Coding
the Meter.
The strip symbol will flash when the meter is ready for the strip to be
inserted.
27