Test Strips - Mission Hb Mode D'emploi

Test Strips

®
The Mission Hb Hemoglobin Test Strips are thin plastic strips which contain a
®
chemical reagent system which works with the Mission Hb Hemoglobin Meter
to measure the hemoglobin (Hb) concentration in capillary and venous whole
blood.
Each test strips appears as shown:
Specimen Application Area - After strip is inserted into the Strip Channel,
apply 10 µL of blood to the center of the test strip. The Specimen
Application Area is visible from the front and the back of the Test Strip.
Insert Arrows - Located on the front of the test strip, the arrows show the
direction in which the test strip should be inserted.
Specimen Application
For best results, fill the Specimen Application Area with approximately 10 µL
of blood specimen. Incorrect results may occur if the specimen is not
applied correctly, or if the Specimen Application Area is not filled.
8