Initial Setup - Mission Hb Mode D'emploi

Section 4

Initial Setup

Before testing, ensure the following procedures are followed.
Turn on Meter
The meter can be operated using the certified AC Adapter or 3 AAA batteries
(1.5V).
To use the meter with batteries, insert 3 AAA batteries (1.5V) into the battery
compartment located on the back of the meter.
To use the meter with the power adapter, connect the Mini USB port of the power
adaptor to the USB port located on the top of the meter with a USB cable, and
plug the adaptor into a 100-240V ac, 50-60 Hz primary power outlet.
The meter can also be powered from the USB port of a personal computer,
connected by a USB cable.
OR
The meter will turn on automatically after the batteries are inserted. The
meter will display the date and time setup screen. Refer to Section 5 Meter
Setup for details. After the date and time have been set, the meter will
automatically turn off.
Press to turn the meter on. The screen will briefly display all of the LCD
symbols. Observe the LCD at startup to ensure all segments and display
elements are turned on, and there are no missing icons or elements. After
startup, observe there are no permanently turned on segments or icons. After
the power-on diagnostic check, the Initial Screen will be displayed.
The meter will turn off automatically after 8 minutes of inactivity.
13