Mission Hb Mode D'emploi page 64

After applying the specimen, ensure the Specimen Application Area is
completely covered.
covered throughout the entire test. If the Specimen Application Area is not
covered, or if there is too much specimen covering the Specimen Application
Area, repeat the test with a new test strip.
Note: Do not add more blood to the test strip if the specimen applied
to the Specimen Application Area is too little. Error E-5 or a
low result may appear on the display. Discard the used strip
and retest.
Code Number
Each package of test strips is printed with a code number
, unopened expiration date
new canister is opened, mark the date on the label. Calculate the opened
expiration date by adding three months. Record this opened expiration
date on the label.
The Specimen Application Area should remain
and test quantity
9
, lot number
. Whenever a