Mission Hb Mode D'emploi page 70

Section 5
With the meter turned off, press and hold
Setup mode shown below.
◄ ►
Press or
No. SEt Test number setup. The test number can be set from 1 to 999.
SEt
System setup, including date, time, test number reset, units and
sound.
CHE Optical Check mode. Refer to Section 8.
PC Data Transfer mode. Refer to Section 7.
dEL Memory Delete mode. Refer to Section 7.
Elt
Exit setup modes and save changes when
The meter will automatically return to the Initial Screen.
Press to enter the mode when the desired submode is displayed.
Meter Setup and Options
to display several setup submodes:
for 4 seconds to enter Meter
15
is pressed.