Mission Hb Mode D'emploi page 62

Meter Use and Precautions
•
Do not get water or other liquids inside the meter.
•
Keep the Strip Channel clean.
•
Keep the meter dry and avoid exposing it to extreme temperatures or
humidity.
•
Do not drop the meter or get it wet. If meter is dropped or has gotten
wet, ensure the meter is working properly by running an Optical Check.
Refer to Optical System Check in Section 8 for details.
•
Do not take the meter apart. Taking the meter apart will void the
warranty.
•
Refer to Section 10 Maintenance for details on cleaning the meter.
•
Keep the meter and all associated parts out of reach of children.
Note: Follow proper precautions and all local regulations when
disposing of the meter and used batteries.
All Hb systems preventive warnings with regard to EMC
1. This instrument is tested for immunity to electrostatic discharge as
specified in IEC 61000-4-2. However, use of this instrument in a
dry environment, especially if synthetic materials are present
(synthetic clothing, carpets, etc.) may cause damaging static
discharges that may cause erroneous results.
2. This instrument complies with the emission and immunity
requirements described in EN 61326-1 and EN 61326-2-6. Do not
use this instrument in close proximity to sources of strong
electromagnetic radiation, as these may interfere with proper
operation of the meter.
3. For professional use, the electromagnetic environment should be
evaluated prior to operation of this device.
7