Mission Hb Mode D'emploi page 74

Time Setup
The hour and minutes will appear at the top of the display separated by a
colon, with flashing hour.
Press ◄ or ► until the correct hour is displayed. Press to save and
proceed to Minutes.
Note: The meter will display AM or PM if the 12H time setting is
chosen.
Minutes will flash. Press ◄ or ► until the correct Minutes are displayed.
Press to save and proceed to Test Number Reset Setup.
Test Number Reset Setup
Press ◄ or ► to turn the test number reset ON or OFF. The test number
will reset to 1 for each new day of testing when the test number reset is
turned on. Press to save and proceed to Units Setup.
OR
19