Wiring; Commissioning - SOMFY HOME MOTION Tilt 50 RTS Notice

2.2 WiriNg

Cables which pass through a metal wall must be protected and isolated using a
sheath or sleeve.
Attach cables to prevent any contact with moving parts.
The cable for the Tilt 50 RTS cannot be removed. If it is damaged, return the
motor to the After-Sales department.
Leave the motor power supply cable accessible: it must be possible to replace it

easily.

Do not unplug the battery when the
motor is working.
Plug the battery with the motor supply cable :

2.3. COmmiSSiONiNg

2.3.1. Programming the rTS control point
Press the up and down buttons
simultaneously on the RTS control point:
the motorised product moves up and down
and the control point is preprogrammed in
the motor
2.3.2. Checking the direction of rotation
1) Press the up button on the RTS control
point:
a) If the motorised product rises (a), the
direction of rotation is correct: Move onto
the section 2.3.3 entitled "Setting the end
limits".
b) If the motorised product lowers (b), the
direction of rotation is incorrect: Move onto
the next step (2).
2) Press the my button on the RTS control
point until the motorised product moves up
and down: The direction of rotation has been
modified.
3) Press the up button on the RTS control
point to check the direction of rotation.
6
1)
2)
Copyright © 2015 Somfy SAS. All rights reserved - V1 - 03/2015
a
=
a a
= =
b
=
b b
= =
3)