Product Information; General Safety Instructions - Hilti VC 20-U Mode D'emploi Original

Masquer les pouces Voir aussi pour VC 20-U:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
switch on the unit until the complete filter system has been installed and the function of the volume-flow
control has been tested.
1.3 Operating instructions
▶ It is essential that the operating instructions are read before initial operation.
▶ Always keep these operating instructions together with the appliance.
▶ Ensure that the operating instructions are with the appliance when it is given to other persons.
Changes and errors excepted.

1.4 Product information

The type designation and serial number are printed on the type identification plate.
▶ Make a note of this data in the following table and always refer to it when making an enquiry to your Hilti
representative or Hilti Service Center.
Product information
Type:
Generation:
Serial no.:
2 Safety
2.1 Warnings
The purpose of warnings
Warnings alert persons to hazards that occur when handling or using the product.
Description of the key words used
DANGER
Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
2.2 Safety instructions

2.2.1 General safety instructions

In addition to the safety instructions given in the various sections of these operating instructions, the following
points must be strictly observed at all times.
▶ Read all the instructions. Failure to follow all the instructions listed below may result in electric shock,
fire and/or serious injury.
▶ If the appliance is used in conjunction with an electric tool, read and follow the operating
instructions for the electric tool and all the warnings.
▶ Modification of the appliance is not permitted.
▶ Use the right appliance for the job. Do not use the appliance for purposes for which it was not
intended. Use it only as directed and when in faultless condition.
▶ Before beginning work with the appliance, find out how to operate it correctly and about any
hazards associated with the materials it will be picking up and how these materials can be
disposed of.
▶ Take the influences of the surrounding area into account. Do not use the appliance where there is
a risk of fire or explosion.
▶ The appliance may only be used by persons who are familiar with it, have been trained on how to
use it safely and who understand the resulting hazards. The appliance is not intended for use by
children.
▶ Store appliances in a secure place when not in use. When not in use, appliances must be stored
in a dry, high place or locked away out of reach of children.
Printed: 01.10.2015 | Doc-Nr: PUB / 5071294 / 000 / 07
All manuals and user guides at all-guides.com
02
19

Publicité

Table des Matières
loading

Table des Matières