Assembly; Feet Assembly - Crivit 340668 1910 Notice D'utilisation

• Do not use different battery
types or brands, new and used
batteries in combination, or bat-
teries with different capacities,
as they leak and can thus cause
damage.
• Observe the polarity (+/-)
when inserting batteries.
• Change all batteries at the
same time and dispose of the
old batteries properly.
• Warning! Batteries may not
be charged or reactivated in
any way. They may not be
dismantled, thrown into fire, or
short-circuited.
• Always keep batteries out of
the reach of children.
• Do not use rechargeable batter-
ies!
• The cleaning and user-mainte-
nance may not be carried out
by children without supervision.
• Clean the batteries and the de-
vice contacts as necessary and
before inserting the batteries.
• Do not expose the batteries to
extreme conditions (e.g. radia-
tors or direct sunlight). Other-
wise there is an increased risk
of leaks.
10 GB/IE/NI
All manuals and user guides at all-guides.com
• Batteries can endanger life if
swallowed. Keep batteries out
of the reach of small children
for this reason. Seek medical
help immediately if a battery is
swallowed.
Danger!
• Handle a damaged or leak-
ing battery with extreme care
and dispose of it properly and
immediately. Wear gloves to
handle the battery.
• If you come into contact with
battery acid then wash the
affected area with soap and wa-
ter. If battery acid gets in your
eye rinse it out with water and
seek medical help immediately!
• Do not short-circuit the terminals.

Assembly

Feet assembly (Fig. B)
1. Remove the packaging materials.
2. Turn the product over, so that the underside is
facing up.
3. Screw the small foot (2) onto the product with
two screws (5) and washers (6) using the
Allen key (7).
Note: the small foot must be mounted on the
front, where the resistance screw (1a) and the
display (1b) can be found.
4. Screw the large foot (3) onto the product with
two screws and washers.