Package Contents/Parts List; Technical Data; Intended Use; Safety Information - Crivit 340668 1910 Notice D'utilisation

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.

Package contents/parts list

(Fig. A)
1 x arm and leg trainer with resistance screw
and display, includes 1 x battery
(1.5V LR03, AAA) (1)
1 x foot, small (2)
1 x foot, large (3)
2 x pedal (4)
4 x screw (5)
4 x washer (6)
1 x allen key (7)
1 x spanner (8)
1 x instructions for use

Technical data

Dimensions: approx. 41 x 31 x 39cm (W x H x D)
Weight: approx. 4.9kg
Max. user weight: 100kg
Date of manufacture (month/year):
06/2020
Symbol for DC voltage
Device class: HC (for home use, precision C)/
not suitable for therapeutic purposes; speed-in-
dependent training device.
WARNING! This stationary training device
is not suitable for high-precision requirements.
Speed-independent training device.
The resistance can be set independently of the
speed.
Battery power supply:
1.5V LR03, AAA
8 GB/IE/NI
All manuals and user guides at all-guides.com

Intended use

The product is not intended for commercial use.
The product allows the user to train arms and
legs; fitted with a resistance screw to increase
and maintain mobility. An integrated display
shows the training progress.

Safety information

Important: read these in-
structions for use carefully
and keep them in a safe
place!
• The product is not suitable for
therapeutic purposes.
• Sit relaxed and upright during
exercise, with a straight back.
• Replace defective parts on the
product immediately and do
not use them until repaired.
• Note that improper training or
excessive training can be injuri-
ous to health.
• Place the product on a horizon,
level, smooth surface such as
tiles, to ensure optimal grip of the
suction cups. Avoid delicate sur-
faces, as these can be damaged.
• Check for wear on the parts. If
the product no longer has ped-
al resistance, the drive belt is
worn out and the product must
be replaced.
• The training area must have
approx. 0.6m of space around
it (Fig. J and K).