Operating The Remote Control / Bluetooth; Bluetooth Connectivity - Skandika V 2500 Mode D'emploi

OPERATING THE REMOTE CONTROL /
BLUETOOTH
OPERATING THE REMOTE CONTROL
Increase / Decrease time:
TIME
keys. If you do not set any time, the device will run for 10 minutes.
Increase / Decrease speed:
programmes (P1/P2/P3) because there it is controlled automatically.
Mode key:
With this key you can switch back from automatic (programme) mode to manual mode - this also works
with programmes that are currently running. The key can also be used to display the current training time if, for
example, the speed or calories are currently being displayed.
Start/Stop:
If you press this key, the device starts moving after a 3-second countdown. When pressed again, the
unit stops moving.
Power key:
If possible, always switch off the appliance with this key after the end of the training session. You can
also switch it off with this key when it is in motion. The unit automatically switches to standby mode without any
training or input. Press the power button to reactivate the computer.
Bluetooth connectivity:
®
(e.g. smartphone or tablet, Bluetooth
stic signal sounds and the Bluetooth
CONNECTIVITY
®
Power key
Start / Stop
Increase / Decrease speed
SPEED
Increase / Decrease time
TIME
Mode key
M
Program key
P
10 Quick adjustment for speed, level 10 in manual mode
20 Quick adjustment for speed, level 20 in manual mode
30
Quick adjustment for speed, level 30 in manual mode
To start the unit, you must first switch on the main switch and then press the
Power key - the unit is now in standby mode. Now you can start training in
manual mode by pressing
are 3 programmes: P1, P2 and P3) by pressing the P-key.
The default time for a workout is 10 minutes, after which the workout ends
automatically. To switch off the device, press the
the training session) and then turn off the main switch.
You can preset the workout time in the range from 1 to 10 minutes by pressing the
You may set the speed in 30 steps (level 1-30). The speed setting does not work in
While the appliance is switched on, search for „ADVENOR" with your mobile device
should be activated) to initiate pairing. After successful connection, an acou-
®
symbol appears in the display.
®
20
Start / Stop or you can select a programme (there
Power key
(after the end of