All manuals and user guides at all-guides.com
Type 1062
Assembly
→
Insert the duplication system
"D" into the stroke limiter.
D
→
Tighten the duplication
system "D" until free contact
is obtained with the top of
D
the limiter, using a flat No 27
spanner.
→
Fully tighten the duplication
rod on the actuator rod using
a screwdriver with a blade of
suitable size.
→
Depressurize the actuator of a
valve which is normally closed
(function "A") or has a double
effect (function "I"): the valve
recovers its default position.
D
English
25