Conrad Electronic WS55 Notice D'emploi page 46

1. Display field A – pool sensor
Display field A is usually used for the display of the values of pool sensor "PS555".
If necessary, or if no "PS55" is being used, the display can be assigned to any other sensor.
To select another sensor, press and hold the "SENSOR" button, until the indicator in the display
field B disappears and the symbol of the sensor number flashes on the right. Briefly press the
"SENSOR" button as many times as necessary until the desired sensor number is displayed
and until the data specific to this sensor appear in display field A.
If no button is actuated or if the "MIN/MAX" button or "SELECT" button is not briefly actuated
for 10 seconds, the device goes back to the normal display.
The data of the indoor sensor (or the data of the selected outdoor sensor) appear in display
field B. Please note:

• Only sensors whose data have already been received can be selected.
Non-assigned sensor addresses are skipped.
• When selecting sensors 1...8, the water symbol appears.
• When selecting the combi sensor, the sensor number "9" appears.
• When selecting the indoor sensor no sensor number appears.
2. Display field B – indoor or outdoor sensor
In the basic setting, display field B indicates the indoor temperature and the indoor air humidity.
If necessary, any other sensor can be assigned to display field B.
To select a sensor, press briefly the "SENSOR" button as many times as necessary until the
desired sensor number is displayed and until the data specific to this sensor appear in display
field B. Please note:

• Only sensors whose data have been already received can be selected.
Non-assigned sensor addresses are skipped.
• When selecting the combi sensor, the sensor number "9" appears.
• When selecting the indoor sensor no sensor number appears.
• If the device is still in the selection mode for display field A, then either wait
to select the selection mode for display field B until display B appears again
or press and hold the "SENSOR" button until Display B appears again.
Thereby you activate the sensor selection of display B.
46
All manuals and user guides at all-guides.com