The storm warning appears when the air pressure drops by more than the set thresh-
old value within 3 hours. The default value is 4hPa. You can adjust the storm warning
sensitivity by changing the threshold value. The threshold value can be adjusted from
3 to 9hPa. Refer to the chapter „Settings" to find out how to perform this setting.
h) History function
The weather station saves certain weather data. You can call up this saved data for
display in the history function.
Press the HISTORY button while the weather station is in normal display mode and
the weather station changes t the history function. By briefly pressing the +/
button, you can call up the saved weather data for the last 24 hours in steps of 3
hours.
You can leave the history function again right away by again pressing the HISTORY
button. If no button is pressed for approx. 10 seconds, the device automatically
leaves the history function.
i) Minimum/maximum memory function
The weather station saves the minimum and maximum data of the subsequent val-
ues. You can view all these values at once or individually.
While the base station is in normal display mode, press the button MIN/MAX once.
The base station changes to the overview display of the maximum values (the values
on the display blink and „MAX" is displayed).
By pressing the +/
sequence. The corresponding maximum values are displayed together with the time
and date on which they were recorded.
You can delete the recorded maximum value and its time/date by pressing the SET
button.
After calling up all maximum values, the base station switches back to the normal
display mode.
1.
Maximum value for indoor air humidity.
2.
Maximum value for indoor temperature
3.
Maximum value for outdoor air humidity.
4.
Maximum value for outdoor temperature
5.
Maximum value for windchill temperature
6.
Maximum value for dew point temperature
7.
Maximum value for air pressure
8.
Maximum value for wind speed
9.
Maximum value for wind gust speed
10. Maximum value for the rain quantity in 1 hour („1h")
All manuals and user guides at all-guides.com
- button, you can call up the recorded maximum values in
-
65