Bypass Mode - PowerWalker VFI 1000 TG Mode D'emploi

6.3 Bypass mode

The LCD display in bypass mode is shown as figure6.3. The
information about the mains power, the battery level, the UPS output
and the load level will be displayed. The UPS will beep once every 2
minutes in bypass mode. The "bYPA" string indicates UPS working in
the bypass mode
6.4 No Output mode
The LCD display in No output mode is shown as figure6.4. The
information about the mains power, the battery level, the UPS output
and the load level could be displayed. The "STbY" string indicates
UPS working in the No output mode.
■ Figure 6.2 The Battery mode
■ Figure 6.3 The Bypass mode
■ Figure 6.4 The No output mode
-21-