Panel Description - PowerWalker VFI 1000 TG Mode D'emploi

4. Panel Description

The display panel of 1000-3000 TG(S) is the same, which is shown as
below:
4.1 Button
Switch Function
ON/Silence
Turn on UPS system:
Button
By pressing the ON-Button continuously for more than 1 second the
UPS system is turned on.
Deactivate acoustic alarm:
By pressing this Button an acoustic alarm can be deactivated in the
battery mode.
By short touch this Button all acoustic alarms can be deactivated in
all modes.
Do the battery test:
By pressing this Button the UPS can do the battery test in the Line
mode or ECO mode or CVCF mode.
OFF
When mains power is normal, the UPS system switches to No
output or Bypass mode by pressing OFF-Button " ", and the inverter
Button
is off. At this moment, if Bypass is enabled, then the output sockets
are supplied with voltage via the bypass if the mains power is
available.
■ Figure 4.1
The Display Panel
-9-