PowerWalker VFI 1000 TG Mode D'emploi page 14

Output Information
Load Information
Battery Information
Mode/Fault/Warning Information
Else
It indicates the input is connected with
mains, and the input power is single
phase input.
It indicates output voltage/frequency
value, which are displayed alternately.
It indicates the load level. Every grid
represents the level of 20%. One grid
would be displayed if the level is
0~20%
It indicates the battery capacity. Every
grid represents the capacity of 20%.
It Indicates the operating mode or
Fault kind or Warning kind or battery
remain time, several warning kinds at
the same time could be displayed
alternately.
It indicates the UPS is in setting mode.
-11-