Battery Mode - PowerWalker VFI 1000 TG Mode D'emploi

level will be displayed. The "LINE" string indicates UPS working in Line
mode.
■ Figure 6.1 The Line mode

6.2 Battery mode

The LCD display in battery mode is shown as figure6.2. The
information about the battery voltage, the battery level, the UPS output
and the load level will be displayed. The "bATT" string indicates UPS
working in the battery mode. If the function of battery remain time is
set to enable, the "bATT" string and battery remaining time (in unit Min
or Sec) would display in turn every 2s.
When the UPS is running in battery mode, the buzzer beeps once
every 4 seconds. If the "ON" button on the front panel is pressed for
more than 1 second, the buzzer will stop beeping (in silence mode).
Press the "ON" button once again for more than 1 second to resume
the alarm function.
-20-