Safety Provisions - EUROM Force 2000 Plus Manuel D'instructions

- Health deficiencies that result from vibrations if the product is
used for long periods, inadequately operated and not
maintained properly.
- Danger of injury and material damage from flying objects
- Wounds and damage to property, as a result of broken
accessories or sudden impact from concealed objects during
use.

Safety provisions

1. Safety systems are for the purpose of protecting the user and may
not be altered.
2. The ON/OFF switch prevents unintended operation of the machine.
3. The spray gun is equipped with a lock. This lock locks the gun and
prevents unintended engagement of the machine.
4. As soon as the trigger of the spray gun is loosened, the pressure
switch switches off the pump and the high-pressure jet stops. The
pump is re-engaged when the trigger is squeezed.
5. The motor is equipped with a thermal protection, which switches off
the motor in case of overheating. In principle, the motor restarts by
itself after it has cooled down sufficiently. However, it is better to
switch off the machine and then wait 5 minutes before re-starting.
Find out why the machine had overheated and then fix the
problem. If it recurs, then do not continue using the machine and
contact your supplier/service provider.
Description
1. Water inlet
2. Wheel
3. On/Off switch
4. Spray gun
5. Spray lance
6. Gun lock
7. Trigger
8. High pressure hose
9. inapplicable
10. Turbo lance
33
11. Water outlet
12. Power cord
13. Reel