External Audio Sources - Blaupunkt Brisbane SD48 Notice D'utilisation Et De Montage

External audio sources

External audio sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device in two
ways.
1. To the rear AUX-IN input (if no CD
changer is connected to the device).
2. To the front AUX-IN socket.
Note:
The Blaupunkt Bluetooth/USB inter-
face can also be connected via the
rear AUX-IN input. The menu offers the
menu items "C'N'C", "CDC ON/OFF"
and "BLUETOOTH", which are used
for the settings and functions of the
Bluetooth/USB interface. These menu
items are explained in the operating
instructions of the Bluetooth/USB in-
terface.
Rear AUX-IN input
The rear AUX-IN input can be selected with
the SRC button 3. The display then shows
"CDC/AUX-IN".
Notes:
• For the rear AUX-IN input, you can en-
ter a separate name that is shown on
the display if you select the connect-
ed audio source. To do so, call up the
"AUX EDIT" menu item in the menu. In
the submenu, press the
ton 2 to input the character of the
current position, and the
2 to change to the next position
32
All manuals and user guides at all-guides.com
Adjusting the rear AUX-IN input
Depending on which device you connect
with the rear AUX-IN input, you must select
the corresponding setting in the menu:
•
•
To check the setting and change it, if nec-
essary,
u
The display shows "MENU".
u
To save the setting,
u
u
When you have fi nished making your
changes,
u
or but-
To exit the menu,
u
button
• An adapter cable is needed to connect
an external audio source to the rear
AUX-IN input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
"CDC ON" for CD changer and other ex-
ternal audio sources.
"CDC OFF" for the Blaupunkt Bluetooth/
USB interface.
press the MENU button >.
button 2 repeatedly
Press the or
until "CDC ON" or "CDC OFF" appears
on the display.
press the button 2 to open the sub-
menu.
button 2 to change be-
Press the
tween the settings "CDC ON" and
"CDC OFF".
press the MENU button >.
press the ESC button <.