Blaupunkt Brisbane SD48 Notice D'utilisation Et De Montage page 31

Press the or
u
between the colour components.
Press the or
u
the value of a colour component.
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Selecting the colour of the display
illumination from the colour scan
(COL SCAN)
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
edly until "COL SCAN" appears on the
display.
button 2 to start the col-
Press the
u
our seek.
The device starts changing the display illu-
mination colour. During the colour scan, the
display intermittently shows "SCANNING"
and "OK (MENU)".
Note:
You can cancel the colour scan by
pressing the or
adjusting a new display colour.
To select the currently set colour,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
All manuals and user guides at all-guides.com
button 2 to switch
button 2 to adjust
button 2 repeat-
button 2 without
Switching the constant colour change
for the display illumination on/off
(SCAN)
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the menu.
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
until "SCAN ON" or "SCAN OFF" ap-
pears on the display.
button 2 to call up the
Press the
u
submenu.
button 2 to toggle be-
Press the
u
tween ON (colour change on) or OFF
(colour change off).
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Display
button 2 repeatedly
31