External Audio Sources; Switching The Aux Input On/Off - Blaupunkt John Deere MP36 Notice D'emploi Et De Montage

Display
When you have finished making your chang-
es,

press the MENU button twice 9.
Selecting a display illumination during a
colour scan

Press the MENU button 9.

Press the or button : repeat-
edly until "COL SCAN" appears on the
display.

Press the or button : to start the
colour seek.
The device starts changing the display illu-
mination colour.
If you want to adopt the currently set col-
our,

press the MENU button 9 once.
To start the seek tuning again,

press the or button :.
If you found the desired colour,

press the MENU button twice 9.


External audio sources

If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be port-
able CD players, MiniDisc players or MP3
players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
The AUX input must be activated in the
menu.
Note:
If no CD changer is connected to the
device, the AUX menu item cannot be
selected.

Switching the AUX input on/off

 Press the MENU button 9.

Press the or button : repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
 Use the buttons : to select be-
tween the options "AUX ON" and "AUX
OFF".
When you have finished making your chang-
es,

press the MENU button 9.
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
External audio sources