Blaupunkt Brisbane SD48 Notice D'utilisation Et De Montage page 24

Sound
Sound
For every source (radio, SD, USB, CD
changer or AUX-IN), you can perform indi-
vidual and separate settings for the sound
(bass, middle and treble) and the equal-
izer.
The X-Bass and volume distribution settings
(balance and fader) apply to all the audio
sources.
Equalizer
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and mid-
dle and to adjust the level for the selected
frequency. In addition, you can adjust the
quality factor for bass and middle.
Equalizer settings
The table below shows the bass, treble and
equaliser setting options in the "AUDIO"
menu.
BASS
Level
-7 to +7
(GAIN)
Frequency
–
(FREQ)
Quality
factor –
(QFAC)
Basic settings
24
All manuals and user guides at all-guides.com
Some settings feature an "E" (for
"ENHANCED"), e.g. "E-BASS".
These settings are performed in the
"ENHANCED" submenu.
Adjusting BASS
To adjust the level of the bass,
u
The display shows "MENU".
u
u
"BASS" appears on the display.
u
AUDIO
TREBLE
E-BASS
-7 to +7
60 Hz, 80 Hz,
– 100 Hz or
200 Hz
1.0, 1.25, 1.5
–
or 2.0
Note:
The table does not contain all the set-
tings that are possible in the menus
"AUDIO" and "ENHANCED".
press the MENU button >.
button 2 repeatedly
Press the or
until "AUDIO" appears on the display.
button 2 to call up the
Press the
audio menu.
button 2 to call up the
Press the
submenu.
ENHANCED
E-MIDDLE
– -7 to +7
0.5 kHz,
1.0 kHz,
1.5 kHz or
2.5 kHz
–
Advanced settings
E-TREBLE
-
10 kHz,
12.5 kHz,
15 kHz or
17.5 kHz
0.5, 0.75, 1.0
or 1.25