entrematic Ditec ION4 Manuel Technique page 84

15.5 Second level menu - RO (Radio Operations)
Display
SR - Remote control storage
You can directly access the Remote control storage menu even with the display turned
off, but only with the Display visualisation mode option set to 00 or 03:
- for transmitting a remote control not present in the memory;
- for transmitting an unstored channel of a remote control already present in the memo-
ry.
WARNING: if the display shows
stored.
TX - Visualisation of counter showing remote controls stored
MU - Indication of maximum number of remote controls that can
be stored in the integrated memory
You can store a maximum of 100 or 200 remote control codes.
20 - 200 remote controls that can be stored
10 - 100 remote controls that can be stored
WARNING: selecting
saved with the
tion reloaded with
EN
→ → →
→ →
oppure
→
or
2"
→
command will be lost. This also applies for the last configura-
→
. In addition, new configurations cannot be saved on
Description
→
flashing, the remote control may already be
16 radiocomandi [esempio]
16 remote controls (example)
→
→
→
2"
(200 remote controls), the configurations
30
...x2, x3...
→
→
Selections
available
and
and
.