Display And Control Panels / Connections; Preparing Start-Up; Install The Truma App On Mobile Terminal Device - Truma iNet Box Mode D'emploi

Display and control panels / connections

Display panels
Figure 1 – Front view
Blue LED (BLUETOOTH)
– flashes upon pairing
– lights up briefly following a reset to the factory settings and
appliance search at TIN 2
Green LED (POWER)
– flashes during start-up and lights up during operation
Red LED (GSM)
– lights up when GSM operation is not possible.
Control panels / connections
1
Figure 2 – Top view
16
iNet Box
2 3 4
1 Button
Connect BLUETOOTH, reset to the factory settings and
perform appliance search
2
Mini-SIM (25 x 15 mm)
3
External antenna connection for GSM antenna
4
Changeover switch internal / external GSM antenna

Preparing start-up

Install the Truma App on mobile terminal
device
1. Load the Truma App from the Apple AppStore or Google
PlayStore onto the mobile terminal device.
2. Install the Truma App on the mobile terminal device.
If necessary, an installed Truma App must be updated.
3. If the Truma App is to be used on several mobile terminal
devices, steps 1 and 2 must be repeated for each mobile
terminal device.
4. To continue installation, follow the instructions in the Truma
App or the instructions below.
For the remote control to function properly with SMS,
it is necessary for the standard SMS app of your mobile
terminal device to have your phone number as the sender
and not manipulate the text. Under no circumstances may
"WebSMS connectors" be used.