Setting The Inductive Proximity Switches (Option For Topcontroltyp 8630); Opening The Hosing Of The Topcontrol Continuous; Positioning The Inductive Proximity Switches; Setting The Inductive Proximity Switches - Burkert 2702 Manuel D'utilisation

settinG the inDuctive proximity sWitches

(option for topCONTROL type 8630)

caution!
Danger of injury from electrical voltage in the open topControl.
Switch the operating power off to the TopControl before opening!

opening the housing of the topControl continuous

Remove any lead seals or fastenings present between cover and housing.
Turn the cover anticlockwise and lift it off.

positioning the inductive proximity switches

The inductive proximity switches are positioned vertically with one adjusting screw each:
Turning clockwise
causes upward adjustment
Caution! Plug connectors may be damaged or loosened.
caution!
plug connectors may be damaged or loosened.
On adjusting the height of the inductive proximity switches, make sure that adjacent flexes
are not pulled (e.g. by getting hooked in the proximity switches).
Screw to adjust the lower proximity switch
Screw to adjust the upper proximity switch
C
Turning anticlockwise
causes downward adjustment
ommissioninG
2702 - 23