Festo KSK Série Notice D'utilisation page 19

KSK−...
Remove the packaging. The packaging is intended for recycling
S
(exception: oiled paper = other waste).
Please comply with national and local safety laws and regulations.
S
Unauthorised product modification is not permitted.
S
Take the tolerance of the tightening torques into consideration.
S
Unless specified otherwise the tolerance is ±20 %.
5 Installation
Please note
If the shafts are damaged, this may lead to
failure of the axis synchronization.
S Check whether the connecting shaft
shows signs of transport or storage
damage especially flaws, dents or
bending.
A KSK−... damaged to this extent is not
suitable for further use.
Please note
If the metal shock absorbers of the
couplings are damaged this may lead to
failure of the axis synchronization.
Check whether the metal shock absorbers
S
of the coupling show signs of flaws, dents
or bending.
A coupling damaged to this extent is not
suitable for further use.
Festo KSK−... 0804b
Fig. 4
Fig. 5
19