SSS Siedle DoorCom ISDN Mode D'emploi page 12

Audible tones
Depiction of the audible tones
which are generated on operation
of the DCI and provide information
on call signals.
ID tone 1 (2-tone chime)
ID tone 2 (3-tone chime)
ID tone 1 and 2 can be assigned for example to two different doors.
ID tone also always sounds when you call the DCI 600.
Signalling tone
Sounds when convenience functions have been defined during program-
ming and these are active (e.g. call rerouting, chain call or doormatic func-
tion). However, this must have been previously set up.
Active tone
Passive tone
The active/passive tone sounds cyclically per status enquiry.
Positive acknowledgement tone
Sounds after a function has been correctly performed.
Negative acknowledgement tone
Sounds when a function has been incorrectly entered
Storey call
Sounds on a door call from the storey door
Possible enquiries:
(Only with existing DCI telephone
connection)
# 3rr Sensor 1 to 12
# 4rr Actuator 1 to 12
# 41x Concierge function
# 420 Multifunction
relay
# 320 Multifunction
input
12
After selecting the function, e.g.
#2221 for switching on actuator 2,
a positive acknowledgement tone
sounds as a sign that the function
has been correctly executed. If the
function is not carried out because
you do not have the necessary entit-
lement, for example, a negative
acknowledgement tone sounds.