Virtus VN8 Mode D'emploi page 9

1. GENERAL INFORMATION
1.1. MANUFACTURER
As the company boasts considerable experience in the field of industrial refrigeration. The technological know-how acquired,
created during years of research and close contact with the production and marketing at an international level, represent the
best guarantee that the manufacturer can offer.
This equipment has been studied inside, externally and in its components, according to the requirements specified by your
market. Furthermore every aspect has been checked for functioning and for appearance before being despatched, as shown
documentation.
To guarantee the long life of this product, use it according to the suggestions made in this manual.
1.2 SERVICE CENTRES
(Sales, Service, Spare parts and Commercial Representation)
For any requirement pertaining to use, maintenance or the request for spare parts, the Costumer should use an authorised
Service Centre (directly care of the manufacturer), specifying the identification details of the equipment shown on the
plaques.
1.3 CERTIFICATION
The Condensed air Refrigerator Cupboards and Tables and Refrigerator Units are produces in accordance with the European
Community Regulations applicable at this time of its appearance on the market.
Because.the.refrigerator.cupboard.and.the.table.do.not.come.into.the.ENCLOSED.IV.of.the.REGULATION.98/37/CEE,.the.
manufacturer provides self-certification with the CE marking.
1.4 GUARANTEE
The new equipment is covered by a guarantee.
The GUARANTEE CERTIFICATE is included with this booklet inside every product. If this booklet is not present you can ask
your supplier for it, specifying:
•. T he.serial.number.(stamped.on.the.relevant.plaque,.see.paragraph.4.6)
•. T he.date.of.purchase
1.5 PREAERRANGEMENTS OF CUSTOMER'S RESPONSIBILITY
It is the Customer's responsibility to carry out everything specified in the documentation. Unless different prior arrange-
ments have been made, the following are usually the Customer's responsibility.
•. Predisposition.of.the.area,.including.any.building.work.and.or.canalisation.required
•. Electric.power.supply.in.accordance.with.the.power.regulations.in.the.country.of.use
•. Cleaning.materials
1.6 STRUCTURE OF THE MANUAL
The Customer must read the information contained in this Manual very carefully, because the correct predisposition, installa-
tion and use are the basis of the Customer-Manufacturer agreement.
1.6.1 AIMS AND CONTENTS
This Manual aims to provide the customer with all the information necessary for not only adequate use of the equipment,
but also for the safest and most autonomous use possible. It contains information regarding Technical Aspects, Operation,
Stopping, Maintenance, Spare Parts and Safety.
Before carrying out any operation on the equipment, the User and the Qualified Technicians must carefully read the instruc-
tions, call the Retailer for clarification.
1.6.2 WHO THE MANUAL IS FOR?
The manual is aimed at the both Retailers and users and also to maintenance workers qualified to carry out work on the
equipment.
The.user.must.not.carry.out.work.reserved.for.qualified.Maintenance.workers.and/or.technicians..The.Manufacturer.is.not.
responsible for any damage caused by lack of respect for this last regulation.
1.6.3 SAFEKEEPING
The Manual for Use and Maintenance must be kept in the immediate vicinity of the equipment, in an appropriate holder and,
above all, protected from liquids and other substances that could make it illegible.
7