Virtus VN8 Mode D'emploi page 167

To display or change the setting temperature or during the programming mode you can choose a parameter or
SET
confirms the action.
Switchover of energy provides.
Check the lights
Start the defrosting manually.
During the programming it changes the parameters listing, or increases the setting temperature
Ù
During the programming it changes the parameters listing, or decreases the setting temperature
Ú
LEDS
DESCRIPTION
Compressor Led;
Stable lighting , contact giving circuit . Light flashing, setpoint is changed or ignition preparing enter the circuit.
Defrost Led;
Stable lighting, defrost is activated. Evaporator Fan Led; Fix Ligthing, evaporator fan activated.
Kabinet Light Led;
Stable lighting, cabinet light is activated. Multifunctional indicates that output is activated.
Evaporator fan led;
Stable lighting ,evaporator fan is activated .
LOC
Keypad or parametres is locked. Follow the corresponding prosedure to open.
Celcius degree Led; ºC
Stationary, measurements are performed in celcius degree.
Fahrenheit degree Led; ºF
Stationary, measurements are performed in Fahrenheit degree .
Alarm led;
Stable lighting, alarm is activated
On/stand-by led. Lighting , stand-by mode is activated.
-----
Attempted operation is not possible.
Timer led
If flashing, time and date is exchanged.
Energy saving led
Stable lighting, energy-saving mode is activated.
Maintenance led
Stable lighting, need maintenance compressor.
Excessive cooling function led
Stable lighting, excessive cooling function is activated.
TOUCH FRENOX CONTROL PANEL
9