Publicité
Les langues disponibles
Les langues disponibles
TOUCH FRENOX CONTROL PANEL
IMPORTANT NOTICES
Frenox control panels have different features to store the products safely in the refrigerator, and also it has some special
features to identify the problems easily.
PRODUCT OPENING: SET and DOWN button press for 2 seconds continiously, product will be starting to work or stopping.
***IMPORTANT NOTICE: Closing of your product only from the control panel allows you to switch to stand-by mode. To
disconnect power from the control panel ,close power button on the electrical box or Pull the plug from the socket. TO SET
THE TEMPERATURE: Press the set button. Use the up and down buttons to set the temperature that you desire Ù and Ú .
Now you can use the product in the new setting temperature.
H.A.C.C.P FEATURE: If there is already an alarm in the device memory, on the screen flashing H.A.C.C.P.
With deleting the oldest one and adding new alarm, shall be held continously 9 HACCP in device memory. Kept in memory
on the alarm following data's.
- The critical temperature value
- The date and time that alarm occurred
- How long the alarm continues
If the device is switched off no alarm will be stored.
"PF" tag, excluding the power failure alarm, all alarms are reset automatically. For deleting ''PF'' alarm from screen, press to
key DOWN and SET.
TO VIEW ALARM ;
To view HACCP alarm is stored in the device ;
Press button DOWN AND SET for 1 second.
Use UP button for provide to come ''LS'' text on the screen.
Press once SET button and pull your hand.
On the screen display alarm tags and number. İlgili alarm etiketinin üzerine gelin ve SET tuşuna basın.
Device will show respectively the saves data . Views respectively occured, the critical value, the year of the alarm, the month,
the day, the hours, minutes.
To reset stored HACCP alarms in the device;
Press button DOWN and UP for 1 second.
Use UP button for provide to come ''LS'' text on the screen.
Press once SET button and pull your hand.
Use UP and DOWN to set '' 149'' value.
If you press again SET button or If you inactivity for 15 seconds ,Flashing '' ......... ' ' on the display for 4 seconds and memory will
reset.
Note: In the absence of alarms stored in the device "RLS" label does not appear on screen.
10
Publicité
