Publicité
Les langues disponibles
Les langues disponibles
FRENOX DIXELL DIGITAL THERMOSTAT XR02CX
IMPORTANT WARNINGS
Frenox digital thermostat have different features to store the products safely in the refrigerator, and also it has some special
features to identify the problems easily.
TO SET THE TEMPERATURE: Press the set button continiously. The "C" icon will start blinking, and you will see the SET
temperature of the product. Use the up and down buttons to set the temperature that you desire, press the SET button. The
temperature SET Value will start blinking and then it will stop. Now you can use the product in the new setting temperature.
The product will work with + 3 C° difference.
TO ENTER PARAMETER LIST: SET and DOWN button press for 5 seconds continiously. HY will disappear on the screen. Find
the parameter listing that you would lşke to change by the UP or DOWN button, after making the necassry change on the
parameter, press the SET button, to confirm the parameter. To enter the second row of parameters, after you see the HY on
the screen, press the SET and Down arrow continiously untill tou see the PR2 on the screen.
ALARM WARNINGS AND THE REASONS
DOOR ALARM 'dA' :
İf the door of the unit is left open too long to effect the inside temperatures of the products, 'dA' will appear on the screen to
tell you that the door must be closed. When you close the doors the screen will be normal. ( This feature is not present in all
products )
HIGH TEMPERATURE ALARM 'HA' :
Reason: While loading to close the air blowing canals of the product.
Solution: Make sure you load the products as it is shown in the user manuel.
Reason: The evaparator fan is not working
Solution: Changing the factory settings of the parameters or malfunctioning fan, get in tocuh with the technical service.
Reason: The door is left open
Solution: Make sure that the door is closed and sealed completly. When the cabin is empty the setting temperature must be
reached in 40 minutes.
Reason: To put high temperature materials inside before the product reached the setting temperature
Solution: When there is a problem with the inside the cabinet temperature, to prevent to spoil the foos inside the inside fans
will stop working after a certain temperature level. If you put hot materials before the inside of the cabinet have reached the
desired temperature, the cabinet temperature will not drop. Make sure that the product has reached the desired temperature
before loading the cabinet.
LOW TEMPERATURE ALARM 'LA' :
Reason: Malfunction of the temperature reading sensors
Solution: On the control panel you will see P1, please contact the technical service
Reason: Digital thermostat malfunction.
Solution: Please contact technicals ervice
DIGITAL THERMOSTAT PROPE ALARMS 'P1'
Reason: Malfunction of the temperature reading sensors.
Solution: On the control panel you will see P1, indentifiying which prope is not working, please contact the technical service
3
Publicité
