Safety Instructions Related To The Product And Technology - Aventics PROFIBUS DP Mode D'emploi

56 AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE
For your safety
W
Persons who assemble, operate, disassemble, or maintain
AVENTICS products must not consume any alcohol, drugs,
or pharmaceuticals that may affect their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only use
accessories and spare parts approved by the manufacturer.
W
Comply with the technical data and ambient conditions
listed in the product documentation.
W
If unsuitable products are installed or used in safety-
relevant applications, this may result in unintended system
operating states that may lead to injuries and/or equipment
damage. Therefore, only use a product in safety-relevant
applications if such use is specifically stated and permitted
in the product documentation.
W
You may only commission the product if you have
determined that the end product (such as a machine or
system) in which the AVENTICS products are installed
meets the country-specific provisions, safety regulations,
and standards for the specific application.
2.6 Safety instructions related to the product
and technology
W
Do not place any mechanical loads on the device under any
circumstances. Do not place any objects on it.
W
Ensure that the power supply is within the stipulated
tolerance for the modules.
W
Observe the safety notes found in your valve system's
operating instructions.
W
A 24 V power pack supplies all components with electricity.
The power pack must be fitted with a safe isolation in
accordance with DIN EN 60742, VDE 0551 classification.
This ensures that the electric circuits comply with SELV/
PELV electric circuits in accordance with IEC 60364-4-41.
W
Switch off the operating voltage before connecting or
disconnecting plugs.