Labeling The Module; Connecting The Bus Coupler Electrically - Aventics PROFIBUS DP Mode D'emploi

AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE
6.2
O
Bus coupler
Slide-in pockets for labels to identify the push-in fittings are
located on the housing (see "Spare parts and accessories" on
page 89).
Fig. 4:
6.3
Applied electric voltage
Danger of injury from electric shock
O

Labeling the module

Inscribe the address provided/used for the bus coupler on
the bus coupler in the bus participant's (BTN) field.
Labels on the bus coupler

Connecting the bus coupler electrically

Make sure the relevant system component is not under
pressure or voltage before electrically connecting
modules to the valve terminal.
CAUTION
63
Assembly