Safety Instructions Related To The Product And Technology - Aventics HF03 LG Mode D'emploi

52 AVENTICS | EtherCAT | R412012792–BDL–001–AB
Safety instructions
Comply with the technical data and ambient
W
conditions listed in the product documentation.
If unsuitable products are installed or used in safety-
W
relevant applications, this may result in unintended
system operating states that could lead to injuries
and/or equipment damage. Therefore, only use a
product in safety-relevant applications if such use is
specifically stated and permitted in the product
documentation.
You may only commission the product if you have
W
determined that the end product (such as a machine
or system) in which the AVENTICS products are
installed meets the country-specific provisions,
safety regulations, and standards for the specific
application.
2.6 Safety instructions related to the
product and technology
Do not change or modify the device.
W
Only use the device within the performance range
W
provided in the technical data.
Do not place any mechanical loads on the device
W
under any circumstances. Do not place loose objects
on it.
This device may only be used for industrial
W
applications (class A). An individual license must be
obtained from the authorities or an inspection center
for systems that are to be used in a residential area
(residential, business, and commercial areas).
Ensure that the power supply is within the stipulated
W
tolerance for the modules.
Observe the safety notes found in your valve system's
W
operating instructions.
A 24 V power pack supplies all components with
W
electricity. The power pack must be fitted with a safe
isolation in accordance with EN 60742, classification
VDE 0551. The corresponding electrical circuits are
thus SELV/PELV circuits in accordance with
IEC 60364-4-41.
Switch off the operating voltage before connecting or
W
disconnecting plugs.