Speck pumpen BADU JET Smart Traduction Du Instruction D'utilisation Originale page 97

NOTICE
If the pump seizes and is repeatedly switched on, the motor can
be damaged.
Ensure that the pump/unit is only switched on once.

4. Wait until the built-in overload switch automatically switches
the motor on after it has cooled down.
– or –
Reset the motor overload switch.
5. Have an electrician test the power supply, fuses and power
consumption.
6. If the built-in or external overload switch switches the motor
off again, notify Customer Services.
7.1.2 Spare parts lists
Spare parts lists for each pump can be found on the website
www.speck-pumps.com.
06|2020
Faults
EN 43