Speck pumpen BADU JET Smart Traduction Du Instruction D'utilisation Originale page 79

8. The pool wall is clamped between the support ring (28) and
the main housing (1) with the tapping screws (52).
9. The dummy plate (30), with the 4 tapping screws (103), is
used to protect the housing during plastering and as a cover
in the case of commissioning the swimming pool without the
final assembly kit being installed.
 Please observe the installation sketch.
Mounting the main housing in a polyester pool (A)
Observe 5.2.3: Aligning the support ring

Fig. 12
06|2020
Installation
EN 25