Speck pumpen BADU JET Smart Traduction Du Instruction D'utilisation Originale page 94

Commissioning/Decommissioning
Fig. 22
6.4.2 Assembling the dummy plate
The following steps are necessary in order to assemble the
dummy plate:
1. Observe the point "Disassembly" on page 36.
2. Attach the dummy plate (30) under the support ring (28) and
fasten it to the main housing (1) using four tapping screws
(103). See "Fig. 12" on page 25 and See "Fig. 13" on page
26.
40 EN 06|2020