Speck pumpen BADU JET Smart Traduction Du Instruction D'utilisation Originale page 69

3 Description
3.1 Components
Fig. 1
(1) Main housing
(38/1) Pneumatic button pump (54/1) Nozzle
(92) Pump
3.2 Function
The pump (92) is connected via the suction and pressure line with
the plastic main housing (1). The pump is switched ON/OFF with
the pneumatic button (38/1). The pool water is sucked in by the
pump (92) via the housing with a low flow rate and pumped back
into the pool under high pressure through the nozzles (54/1). The
flow rate and therefore the efficiency of the counter swim unit can
be set using the adjustable nozzle (54/1). Air can also optionally
be mixed into the flow from the nozzle with the air regulator (21/1).
06|2020
(21/1) Air regulator
Description
EN 15