MINN KOTA FORTREX Instructions D'installation page 17

FEATURE OVERVIEW AND CONNECTING THE CABLES
The cable(s) from the Foot Pedal for each feature installed on the trolling motor is connected to an output device separately. Once the
features that may be installed are identified, follow the instructions below to ensure the cables are connected correctly.
Built-In MEGA Down Imaging
Built-In MEGA Down Imaging delivers nearly 3X the output of standard Side Imaging®, and takes fishfinding into the megahertz frequency
for the very first time. The Minn Kota flagship families of trolling motors, including Ultrex, Ulterra, Terrova, and Fortrex, now include
Built-In MEGA Down Imaging sonar, the clearest imaging available only from Humminbird. With Humminbird MEGA imaging sonar built
right into the trolling motor, you now have a crystal clear view of what's directly beneath the boat, without having to manage all of the
cables that come with external transducers. The Built-In MEGA DI transducer is only available on new models equipped from the factory
and cannot be added to an existing trolling motor.
The Built-in MEGA DI transducer will provide both MEGA Down Imaging and 2D CHIRP Digital Sonar to select Humminbird models. All
Built-In MEGA DI trolling motors, will come "Solix Ready" out of the box. An adapter cable accessory (MKR-MDI-1 1852085 or MKR-
MDI-2 1852086) is available for purchase that will allow the connection of any compatible Humminbird Helix fish finder. The MKR-MDI-1
is used on Helix 8, 9, 10 and 12 models. The MKR-MDI-2 is used for Humminbird Helix 7 models only. See the
Imaging Compatibility chart online.
NOTICE:
You can only view MEGA Down Imaging with a MEGA DI or MEGA SI HELIX G2N or G3N Series model and a required
adapter, or with any SOLIX Series model. The built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do
not already have the capability. f you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get
2D CHIRP Digital Sonar from the transducer. Built-In MEGA DI is not supported by HELIX G1 models or other brands of fish finders.
1
a. The Built-In MEGA Down Imaging connector from
the Foot Pedal is a 14 pin connector. On a Fortrex,
Built-In MEGA Down Imaging will never be installed
with Universal Sonar. Locate and identify the
correct connection for Built-in MEGA Down Imaging
cable(s), at the base of the Foot Pedal.
NOTICE:
Built-in MEGA Down Imaging may be
pre-installed on a Fortrex motor without other
features that require external connections.
Fourteen Pin
Connector
Built-in MEGA Down
Imaging cable from
Control Head
©2018 Johnson Outdoors Marine Electronics, Inc.
FEATURE OVERVIEW AND CONNECTING THE CABLES
Heel End
Built-in MEGA
Down Imaging
Foot Pedal
Base
Built-In MEGA Down
Toe End
Power Cables
minnkotamotors.com | 17