MINN KOTA FORTREX Instructions D'installation page 16

ROUTING CONNECTION CABLES
2
b. Identify where the Built-in MEGA Down Imaging or
Universal Sonar Cable needs to be connected and
route along an established routing system in your
boat.
c. Use cable ties to loosely secure cables if needed.
NOTICE:
After the cable(s) exit(s) the Foot
Pedal, it should be routed through an established
routing system on the boat, in an area with minimal
interference. Power cables or other elements that may
produce interference for the sonar signals. Inspect
the selected route carefully to ensure that there are
no sharp edges, obstacles, or obstructions that may
damage the cables.
16 | minnkotamotors.com
Foot Pedal
CAUTION
Improperly securing the Connection Cables may cause damage
to the product and void your product warranty. Do not over
tighten the cable ties as it may damage the wires.
Power Cables
Built-in MEGA
Down Imaging or
Universal Sonar
©2018 Johnson Outdoors Marine Electronics, Inc.